High Quality 100W Flexible Solar Panel Kit, with USB Charging & Cable Gland - TUV, CE.
Pre-Made Cables including fuseholder - Fast Install!
High Quality 100W Flexible Solar Panel Kit with 'Industry Leading' Quality and Power Output & 2 YEAR Panel Warranty.
The panels are multi use, they are small enough to be mobile for caravan or mobile home use or can be permanently mounted on a garage roof or other suitable surface.
One of these 100W Solar Kits can be used to charge up a 12V Battery and 2 x USB devices through the included 10A Charge Controller and PV Cables.
We have designed this kit to be easy to setup and install with the highest quality components.
Please Note: Custom Cable Lengths for Charging & PV Available Upon Request.
100W Flexible Solar Panel
- ETFE Material for Superior Strength, Durability and Corrosion Resistance
- Junction Box - IP65 Rated
- Output Cable - TUV 1x4.0mm2/UL12AWG,Length: 90cm
- Dimensions - 940x670x3.0mm
- Weight - 2.5KGS
- Reverse Current Protection - Blocking Diodes x 2
- Application Class - Class A
- Cell Technology - Mono Si
- Maximum Power - 100W
- Optimum Power Voltage (Vmp) - 17.30V
- Optimum Operating Current (Imp) - 5.89A
- Open Circuit Voltage (Voc) - 20.40V
- Short Circuit Current (Isc) - 6.24A
Temperature & Coefficients:
- Operating Temperature(°C): -40°C ~ + 85°C
- Maximum System Voltage: 45V(IEC) DC
- Maximum Rated Current Series: 10A
10A Solar Charge Controller PWM 1224V Auto Detect + USB Charging Ports x 2
Charge Controller Features:
This sophisticated solar charge controller family for low cost applications.
The electronic circuit is equipped with a microcontroller that provides high-efficiency
charging technology together with a number of outstanding status display, warning
and Safety functions.
Fully Automatic operation with electronic protection, detection of Day and night.
- LCD Display for up to the minute charging information.
- 2 x USB Charging Ports 5V @ 3A
- PWM-regulation (series type)
- Boost,Equalize and Float charging.
- Automatic 12/24 Volt detection
- Integrated temperature compensation
- Large terminals for ease of installation.
- SOC and voltage controlled LVD
- Fully electronically protected
- Power Consumption <10mA
These Solar Charge controllers are an ideal way to get your Solar System charging your battery bank in a controlled manner thus protecting and extending your battery life.
2 x 5M 4mm TUV Rated PV Cable Incl. MC4 Connectors (One of each)
2 X 5M Solar PV Cables come pre-crimped with One Male and One Female Connector, these cables are perfect for connecting from a Solar Panel to a charge controller or inverter where only one set of MC4 Connectors is required. If you require both ends of the cable crimped please see our other items.
PV Cable Features:
- TUV Approved Solar Cable
- Ozone Resistant to EN50396
- UV Resistant to UNE-HD:2008(HD605/A1)
- Durability Tested to last 25 Years according to EN 60216
- TUV 2 PfG 1169/08.2007
- CEI 20-91
- Flame Resistant: IEC 60332-1-2
- Conductor: Class 5 Flexible Tinned copper to IEC 60228
- Temperature Range: -40C to +90C
- Minimum Bending Radius: 4 x Diameter
- Thermal Endurance: IEC 60216-
- Maximum Voltage 1000V
- 30A Max Current
- Operating Temperature -40C - +90C
- Waterproof Grade: IP67
- Flame class: UL94-V0
- Connector Materials: Nickel Copper
- Insulation Material: PA12/1988HB
- TUV Certified
- Water Weatherproof Rubber Seal
- High Quality Machined Copper Sealed Tip
- Easy Disconnect Clips No tool required
Charge Cable Features:
- Size: 2.5mm Sq (14 AWG) Single Core 50/0.25 (50 Copper Strands) / 0.25mm)
- Length: 1.5 Meter pre-made with waterproof inline fuseholder.
- Operating Temperature: -40C to 105C
- Current Rating: 30Amps
- Voltage Rating: 12v/24v/50v/110v/230v/415v/600v (600v rms)
- Weight: 34g/m
- Insulation Type: Standard PVC Hard
- Outside Diameter: 3.65mm
- Insulation Thickness: 0.8mm
- Minimum Bending Radius: 6x Diameter
- Approval: BS6231 UK, CSA TEW Canada, UL Style 1015, 1028 or 1283 USA
Cable Gland Features:
- Ease of installation.
- Ideal for the entry of cables into your environment without screws.
- Made from tough ABS plastic.
- Ideal for Caravans, Boats, Campers & boats.
- If not required one entry hole can be blocked off with the supplied terminator screw.
- The entry gland can be bonded with Sikaflex.
- These Dual Entry Cable Glands are the perfect accompaniment to our White Corner and side mounts.
- Top Edges: 90mm
- Side Edge Edges: 100mm
- Depth: 50mm
- Weight: Per Gland 300g
These High Quality Solar PV Cables and connectors will ensure minimum loss and maximum lifetime reliability for your Solar Array.