300W Solar Kit - USB Charge

New product

300W Mono Solar Kit - Complete with USB Charge Controller - PV Cables - Charge Cables with Ring Terminals

More details

1 Item

Warning: Last items in stock!

£295.00 Inc. VAT

Add to wishlist

More info

High Quality 300W Monocrystalline Solar Panel Kit - USB Charging , TUV, CE.

Pre-made Cables with Inline Fuseholder - Fast Install!

High Quality 300W Monocrystalline Solar Panel Kit with 5 Year Quality Warranty, 90% Power Output @ 10 Years, 80% @ 25 Years.

The panels are multi use, they are small enough to be mobile for caravan or mobile home use or can be permanently mounted on a garage roof or other suitable surface.

One of these 300W Solar Kits can be used to charge up a 12V Battery through the included 30A Charge Controller and PV Cables.

We have designed this kit to be easy to setup and install with the highest quality components.

Please Note: Custom Cable Lengths for Charging & PV Available Upon Request.

3 x 100W Monocrystalline TUV Certified Solar Panel

Panel Features:

Industry Leading Warranty - Quality Warranty 5 Years, 90% Power Output @ 10 Years, 80% Power Output @ 25 Years.
Frame - Anodized Aluminium Alloy
Front Glass - 3.2mm,High Transmission, Low Iron,Tempered Glass
Cell Type - Monocrystalline 125x125mm (5 inch)
Junction Box - IP65 Rated
Output Cable - TUV 1x4.0mm2/UL12AWG,Length: 90cm
Dimensions - 945x670x30mm
Weight - 7kg
Reverse Current Protection - Blocking Diodes x 2
 

Electrical Specification:

Maximum Power - 100W
Optimum Power Voltage (Vmp) - 17.8
Optimum Operating Current (Imp) - 5.62
Open Circuit Voltage (Voc) - 22.30
Short Circuit Current (Isc) - 6.07
Cell Efficiency (%) - 18.43%
 

Temperature & Coefficients:

Operating Temperature(°C): -40°C ~  +   85°C
Maximum System Voltage: 1000V(IEC) DC
Maximum Rated Current Series: 10A
Temperature Coefficients of Pmax:  -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operating Cell Temperature (NOCT):  47+/-2°C

30A Solar Charge Controller PWM 12/24V Auto Detect (Please Note for 300W 12V)

Charge Controller Features:

The LMS-L Series intelligent Solar Controller is equipped with industrial grade STM 8 microprocessor to control the charge and discharge process and has perfect & reliable charge and discharge period management. The circuit is characterised by high efficiency and low consumption. This controller has multiple load control modes and is adaptable.

Controller Specifications & Features:

  • LCD Display for up to the minute information
  • 2 x USB Charging Ports 5V @ 1A
  • Excellent Heat Balance balance design with natural cooling 
  • 4 stage charge period managment (EQU, Bulk, ABS, Float)
  • Temperature compensation function
  • Lead Acid Cell type Batteries, Wet, Gel or AGM.
  • Sophisticated electronic protection, including overcurrent, load short circuit & low voltage.
  • Well designed charge loop gives improves efficiency or charge and discharge with reduced heat.
  • Working Temp -35C - +55C
  • Rated Battery Current 30A
  • Rated Load Current 30A 

These Solar Charge controllers are an ideal way to get your Solar System charging your battery bank in a controlled manner thus protecting and extending your battery life.

2 x 5M 4mm TUV Rated PV Cable Incl. MC4 Connectors (One of each)

2 X 5M Solar PV Cables come pre-crimped with One Male and One Female Connector, these cables are perfect for connecting from a Solar Panel to a charge controller or inverter where only one set of MC4 Connectors is required. If you require both ends of the cable crimped please see our other items.

PV Cable Features:

  • TUV Approved Solar Cable
  • Ozone Resistant to EN50396
  • UV Resistant to UNE-HD:2008(HD605/A1)
  • Durability Tested to last 25 Years according to EN 60216
  • TUV 2 PfG 1169/08.2007
  • CEI 20-91
  • Flame Resistant: IEC 60332-1-2
  • Conductor: Class 5 Flexible Tinned copper to IEC 60228
  • Temperature Range: -40C to +90C
  • Minimum Bending Radius: 4 x Diameter
  • Thermal Endurance: IEC 60216-
  • Maximum Voltage 1000V
  • 30A Max Current
  • Operating Temperature -40C - +90C
  • Waterproof Grade: IP67
  • Flame class: UL94-V0
  • Connector Materials: Nickel Copper
  • Insulation Material: PA12/1988HB
  • TUV Certified
  • Water Weatherproof Rubber Seal
  • High Quality Machined Copper Sealed Tip
  • Easy Disconnect Clips No tool required

Charge Cable Features:

  •     Size: 2.5mm Sq (14 AWG) Single Core 50/0.25 (50 Copper Strands) / 0.25mm)
  •     Length: 1.5M Meter Pre-made with Waterproof Fuseholder and Ring Terminals
  •     Operating Temperature: -40C to 105C
  •     Current Rating: 30Amps
  •     Voltage Rating: 12v/24v/50v/110v/230v/415v/600v (600v rms)
  •     Weight: 34g/m
  •     Insulation Type: Standard PVC Hard
  •     Outside Diameter: 3.65mm
  •     Insulation Thickness: 0.8mm
  •     Minimum Bending Radius: 6x Diameter
  •     Approval: BS6231 UK, CSA TEW Canada, UL Style 1015, 1028 or 1283 USA

These High Quality Solar PV Cables and connectors will ensure minimum loss and maximum lifetime reliability for your Solar Array.

PayPal

Reviews

No customer reviews for the moment.

Write a review

300W Solar Kit - USB Charge

300W Solar Kit - USB Charge

300W Mono Solar Kit - Complete with USB Charge Controller - PV Cables - Charge Cables with Ring Terminals