160W Solar Kit - USB Charge + ABS Side & Corner Mounts

New product

160W Mono Solar Kit - Complete with USB Charge Controller - PV Cables - Charge Cables with Ring Terminals & White ABS Corner & Side Mounts with Dual Cable Gland

More details

This product is no longer in stock

£199.95 Inc. VAT

Add to wishlist

More info

High Quality 160W Monocrystalline Solar Panel Kit, TUV, CE.

Mounts - Gland & Pre-made Cables Including Fuseholder - Fast Install!

High Quality 160W Monocrystalline Solar Panel Kit with 'Industry Leading' Quality and Power Output & 5 Year Quality Warranty. German Solarworld Solar Cells

The panels are multi use, they are small enough to be mobile for caravan or mobile home use or can be permanently mounted
on a garage roof or other suitable surface.

One of these 160W Solar Kits can be used to charge up a 12V Battery and 2 x USB devices through the included 20A Charge Controller and PV Cables.

We have designed this kit to be easy to setup and install with the highest quality components.

Please see pictures for example setup (the small battery is for demo purpose only, any size 12V can be charged)

Please Note: Custom Cable Lengths for Charging & PV Available Upon Request.

160W Monocrystalline TUV Certified Solar Panel

Panel Features:

  • Industry Leading Warranty - Quality Warranty 5 Years, 90% Power Output @ 10 Years, 80% Power Output @ 25 Years.
  • Frame - Anodized Aluminium Alloy
  • Front Glass - 3.2mm,High Transmission, Low Iron,Tempered Glass
  • Cell Type - Monocrystalline 125x125mm (5 inch)
  • Junction Box - IP65 Rated
  • Output Cable - TUV 1x4.0mm2/UL12AWG,Length: 90cm
  • Dimensions - 1475x670x35mm 
  • Weight - 14kg
  • Reverse Current Protection - Blocking Diodes x 2

Electrical Specification:

  • Maximum Power - 160W
  • Optimum Power Voltage (Vmp) - 17.8
  • Optimum Operating Current (Imp) - 8.99
  • Open Circuit Voltage (Voc) - 22.30
  • Short Circuit Current (Isc) - 9.71
  • Cell Efficiency (%) - 18.43

Temperature & Coefficients:

  • Operating Temperature(°C): -40°C ~  +   85°C
  • Maximum System Voltage: 1000V(IEC) DC
  • Maximum Rated Current Series: 10A
  • Temperature Coefficients of Pmax:  -0.435%
  • Temperature Coefficients of Voc: -0.35%
  • Temperature Coefficients of Isc: 0.043%
  • Nominal Operating Cell Temperature (NOCT):  47+/-2°C


20A Solar Charge Controller PWM 1224V Auto Detect + USB Charging Ports x 2

Charge Controller Features:

This sophisticated solar charge controller family for low cost applications.
The electronic circuit is equipped with a microcontroller that provides high-efficiency
charging technology together with a number of outstanding status display, warning
and Safety functions.

Fully Automatic operation with electronic protection, detection of Day and night.


  • LCD Display for up to the minute charging information.
  • 2 x USB Charging Ports 5V @ 3A
  • PWM-regulation (series type)
  • Boost,Equalize and Float charging.
  • Automatic 12/24 Volt detection
  • Integrated temperature compensation
  • Large terminals for ease of installation. 
  • SOC and voltage controlled LVD
  • Fully electronically protected
  • Power Consumption <10mA

These Solar Charge controllers are an ideal way to get your Solar System charging your battery bank in a controlled manner thus protecting and extending your battery life.


2 x 5M 4mm TUV Rated PV Cable Incl. MC4 Connectors (One of each)

2 X 5M Solar PV Cables come pre-crimped with One Male and One Female Connector, these cables are perfect for connecting from a Solar Panel to a charge controller or inverter where only one set of MC4 Connectors is required. If you require both ends of the cable crimped please see our other items.

PV Cable Features:

  • TUV Approved Solar Cable
  • Ozone Resistant to EN50396
  • UV Resistant to UNE-HD:2008(HD605/A1)
  • Durability Tested to last 25 Years according to EN 60216
  • TUV 2 PfG 1169/08.2007
  • CEI 20-91
  • Flame Resistant: IEC 60332-1-2
  • Conductor: Class 5 Flexible Tinned copper to IEC 60228
  • Temperature Range: -40C to +90C
  • Minimum Bending Radius: 4 x Diameter
  • Thermal Endurance: IEC 60216-
  • Maximum Voltage 1000V
  • 30A Max Current
  • Operating Temperature -40C - +90C
  • Waterproof Grade: IP67
  • Flame class: UL94-V0
  • Connector Materials: Nickel Copper
  • Insulation Material: PA12/1988HB
  • TUV Certified
  • Water Weatherproof Rubber Seal
  • High Quality Machined Copper Sealed Tip
  • Easy Disconnect Clips No tool required


Charge Cable Features:

  •     Size: 2.5mm Sq (14 AWG) Single Core 50/0.25 (50 Copper Strands) / 0.25mm)
  •     Length: 1 Meter Each, Red & Black
  •     Operating Temperature: -40C to 105C
  •     Current Rating: 30Amps
  •     Voltage Rating: 12v/24v/50v/110v/230v/415v/600v (600v rms)
  •     Weight: 34g/m
  •     Insulation Type: Standard PVC Hard
  •     Outside Diameter: 3.65mm
  •     Insulation Thickness: 0.8mm
  •     Minimum Bending Radius: 6x Diameter
  •     Approval: BS6231 UK, CSA TEW Canada, UL Style 1015, 1028 or 1283 USA

Corner Mount Features:

  •     External Size: 150x150x60mm
  •     Internal Size: 90x90x35mm 
  •     Durable Palstic
  •     Drill hole locations

These High Quality Solar PV Cables and connectors will ensure minimum loss and maximum lifetime reliability for your Solar Array.



No customer reviews for the moment.

Write a review

160W Solar Kit - USB Charge + ABS Side & Corner Mounts

160W Solar Kit - USB Charge + ABS Side & Corner Mounts

160W Mono Solar Kit - Complete with USB Charge Controller - PV Cables - Charge Cables with Ring Terminals & White ABS Corner & Side Mounts with Dual Cable Gland