100W DUAL Charge Solar Kit

New product

100W Mono DUAL Charge Solar Kit - PV Cables - Charge Cables with Ring Terminals

More details

10 Items

£142.98 Inc. VAT

Add to wishlist

More info

High Quality 100W Monocrystalline Solar Panel Kit, DUAL Charging.

Pre-made Cables Including Fuseholder - Fast Install!

High Quality 100W Monocrystalline Solar Panel Kit with 'Industry Leading' Quality and Power Output & 5 Year Panel Quality Warranty. German Solarworld Solar Cells

The panels are multi use, they are small enough to be mobile for caravan or mobile home use or can be permanently mounted on a garage roof or other suitable surface.

One of these 100W Solar Kits can be used to charge up 2 x 12V Batteries and through the included 10A Dual Charge Controller and PV Cables.

We have designed this kit to be easy to setup and install with the highest quality components.

Please Note: Custom Cable Lengths for Charging & PV Available Upon Request.

100W Monocrystalline TUV Certified Solar Panel

Panel Features:

Industry Leading Warranty - Quality Warranty 5 Years, 90% Power Output @ 10 Years, 80% Power Output @ 20 Years.
Frame - Anodized Aluminium Alloy
Front Glass - 3.2mm,High Transmission, Low Iron,Tempered Glass
Cell Type - Monocrystalline 125x125mm (5 inch)
Junction Box - IP65 Rated
Output Cable - TUV 1x4.0mm2/UL12AWG,Length: 90cm
Dimensions - 945x670x30mm
Weight - 7kg
Reverse Current Protection - Blocking Diodes x 2
 

Electrical Specification:

Maximum Power - 100W
Optimum Power Voltage (Vmp) - 17.8
Optimum Operating Current (Imp) - 5.62
Open Circuit Voltage (Voc) - 22.30
Short Circuit Current (Isc) - 6.07
Cell Efficiency (%) - 18.43%
 

Temperature & Coefficients:

Operating Temperature(°C): -40°C ~  +   85°C
Maximum System Voltage: 1000V(IEC) DC
Maximum Rated Current Series: 10A
Temperature Coefficients of Pmax:  -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operating Cell Temperature (NOCT):  47+/-2°C
 

10A Solar Dual Charge Controller PWM 1224V Auto Detect

Charge Controller Features:

This sophisticated Dual Solar Charge Controller for Caravans, RVs, Boats and Golf Carts etc. Dual Battery Charging Eliminates the extra cost of two Solar Charging Systems. The charging priority is selectable Fully Automatic operation with extensive electronic protections.

Specifications:

Battery State-of-Charge display with LEDs
Optional Status Meter
PWM-regulation (series type)
Boost,Equalize and Float charging.
Automatic 12/24 Volt detection
Integrated temperature compensation
Large terminals to 4mm Cable
Fully electronically protected
Over Charge, Short Circuit & Reverse Polarity Protection
Low Power Consumption
153x76x37mm
These Solar Charge controllers are an ideal way to get your Solar System charging your battery bank in a controlled manner thus protecting and extending your battery life.

2 x 5M 4mm TUV Rated PV Cable Incl. MC4 Connectors (One of each)

2 X 5M Solar PV Cables come pre-crimped with One Male and One Female Connector, these cables are perfect for connecting from a Solar Panel to a charge controller or inverter where only one set of MC4 Connectors is required.

PV Cable Features:

TUV Approved Solar Cable
Ozone Resistant to EN50396   
UV Resistant to UNE-HD:2008(HD605/A1)      
Durability Tested to last 25 Years according to EN 60216     
TUV 2 PfG 1169/08.2007         
CEI 20-91         
Flame Resistant: IEC 60332-1-2        
Conductor: Class 5 Flexible Tinned copper to IEC 60228        
Temperature Range: -40C to +90C        
Minimum Bending Radius: 4 x Diameter        
Thermal Endurance: IEC 60216-     
Maximum Voltage 1000V        
30A Max Current      
Operating Temperature -40C - +90C       
Waterproof Grade: IP67       
Flame class: UL94-V0        
Connector Materials: Nickel Copper         
Insulation Material: PA12/1988HB         
TUV Certified         
Water Weatherproof Rubber Seal        
High Quality Machined Copper Sealed Tip        
Easy Disconnect Clips No tool required
 

Charge Cable Features: (Please Note: 2 Sets of Charge Cable are supplied)

Size: 2.5mm Sq (14 AWG) Single Core 50/0.25 (50 Copper Strands) / 0.25mm)
Length: 1.5 Meter Each, with Waterproof fuseholder & 10A Fuse + Ring Terminals
Operating Temperature: -40C to 105C
Current Rating: 30Amps
Voltage Rating: 12v/24v/50v/110v/230v/415v/600v (600v rms)
Weight: 34g/m
Insulation Type: Standard PVC Hard
Outside Diameter: 3.65mm
Insulation Thickness: 0.8mm
Minimum Bending Radius: 6x Diameter
Approval: BS6231 UK, CSA TEW Canada, UL Style 1015, 1028 or 1283 USA

These High Quality Solar PV Cables and connectors will ensure minimum loss and maximum lifetime reliability for your Solar Array


PayPal

Reviews

No customer reviews for the moment.

Write a review

100W DUAL Charge Solar Kit

100W DUAL Charge Solar Kit

100W Mono DUAL Charge Solar Kit - PV Cables - Charge Cables with Ring Terminals