200W MPPT Solar Kit - Victron 20A Controller

New product

200W Mono Solar Kit - Complete with Victron Smart Solar 20A MPPT Charge Controller - PV Cables - Charge Cables with Ring Terminals

More details

2 Items

Warning: Last items in stock!

£312.00 Inc. VAT

Add to wishlist

More info

High Quality 200W Monocrystalline Solar Panel Kit with Victron MPPT Controller & Bluetooth Monitoring

High Quality 200W Monocrystalline Solar Panel Kit with 'Industry Leading' Quality and Power Output & 5 Year Panel Warranty. Complete with a 20A MPPT Controller you can expect 98% Charging Efficiency giving you maximum conversion.

Monitor your Solar System on your mobile phone via the built in Bluetooth Module on the Victron Charge Controller.

The panels are multi use, they are small enough to be mobile for caravan or mobile home use or can be permanently mounted on a garage roof or other suitable surface.

One of these 200W Solar Kits can be used to charge up a 12V or 24V Battery or bank through the included 20A MPPT Charge Controller and PV Cables.

We have designed this kit to be easy to setup and install with the highest quality components.

Please Note: Custom Cable Lengths for Charging & PV Available or different Mounting Options avalable Upon Request.

2 x 100W Monocrystalline TUV Certified Solar Panel

Panel Features:

Industry Leading Warranty - Quality Warranty 5 Years, 90% Power Output @ 10 Years, 80% Power Output @ 25 Years.
Frame - Anodized Aluminium Alloy
Front Glass - 3.2mm,High Transmission, Low Iron,Tempered Glass
Cell Type - Monocrystalline 125x125mm (5 inch)
Junction Box - IP65 Rated
Output Cable - TUV 1x4.0mm2/UL12AWG,Length: 90cm
Dimensions - 945x670x30mm
Weight - 7kg
Reverse Current Protection - Blocking Diodes x 2
 

Electrical Specification:

Maximum Power - 100W
Optimum Power Voltage (Vmp) - 17.8
Optimum Operating Current (Imp) - 5.62
Open Circuit Voltage (Voc) - 22.30
Short Circuit Current (Isc) - 6.07
Cell Efficiency (%) - 18.43%
 

Temperature & Coefficients:

Operating Temperature(°C): -40°C ~  +   85°C
Maximum System Voltage: 1000V(IEC) DC
Maximum Rated Current Series: 10A
Temperature Coefficients of Pmax:  -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operating Cell Temperature (NOCT):  47+/-2°C

Victron SmartSolar MPPT 100 | 20 (20A100V) Charge Controller

By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.

Charge Controller Features:

  • Advanced Ultra Fast MPPT technology.
  • Bluetooth Smart built-in: enables set-up and monitoring with a smart phone or other Bluetooth enabled device
  • Advanced Maximum Power Point Detection in case of partial shading condition
  • Battery Life: intelligent battery management by load shedding
  • Automatic battery voltage recognition
  • Flexible charge algorithm
  • Over-temperature protection and power de-rating when temperature is high

Electronic Protections:

  • Reverse polarity protection
  • Short circuit protection
  • Over Temperature protection

Specification:

  • Auto Detect Battery - 12-24V
  • Rated Charge Current - 20A
  • Nominal PV Power @ 12V - 290W
  • Nominal PV Power @ 24V - 580W
  • Automatic Load Disconnect - 15A
  • Peak Efficiency - 98%
  • Self use Power - 10mA
  • Charge Voltage (Absorbtion) - 14.4V/28.8V
  • Charge Voltage (Float) - 13.8V/27.6V
  • Charge Algorithm - Multi-Stage Adaptive
  • Power Terminals - 6mm
  • Dimensions - 100 x 113 x 60 0.65KGS
  • Safety - EN/IEC 62109-1 - Electronics IP43, Connections IP22

These Solar Charge controllers are an ideal way to get your Solar System charging your battery bank in a controlled manner thus protecting and extending your battery life.

2 x 5M 4mm TUV Rated PV Cable Incl. MC4 Connectors (One of each)

2 X 5M Solar PV Cables come pre-crimped with One Male and One Female Connector, these cables are perfect for connecting from a Solar Panel to a charge controller or inverter where only one set of MC4 Connectors is required. If you require both ends of the cable crimped please see our other items.

PV Cable Features:

  • TUV Approved Solar Cable
  • Ozone Resistant to EN50396
  • UV Resistant to UNE-HD:2008(HD605/A1)
  • Durability Tested to last 25 Years according to EN 60216
  • TUV 2 PfG 1169/08.2007
  • CEI 20-91
  • Flame Resistant: IEC 60332-1-2
  • Conductor: Class 5 Flexible Tinned copper to IEC 60228
  • Temperature Range: -40C to +90C
  • Minimum Bending Radius: 4 x Diameter
  • Thermal Endurance: IEC 60216-
  • Maximum Voltage 1000V
  • 30A Max Current
  • Operating Temperature -40C - +90C
  • Waterproof Grade: IP67
  • Flame class: UL94-V0
  • Connector Materials: Nickel Copper
  • Insulation Material: PA12/1988HB
  • TUV Certified
  • Water Weatherproof Rubber Seal
  • High Quality Machined Copper Sealed Tip
  • Easy Disconnect Clips No tool required

Charge Cable Features:

  •     Size: 2.5mm Sq (14 AWG) Single Core 50/0.25 (50 Copper Strands) / 0.25mm)
  •     Length: 1.5 Meter Each, Pre-Made Cable with Inline Fuseholder & Ring Terminals
  •     Operating Temperature: -40C to 105C
  •     Current Rating: 30Amps
  •     Voltage Rating: 12v/24v/50v/110v/230v/415v/600v (600v rms)
  •     Weight: 34g/m
  •     Insulation Type: Standard PVC Hard
  •     Outside Diameter: 3.65mm
  •     Insulation Thickness: 0.8mm
  •     Minimum Bending Radius: 6x Diameter
  •     Approval: BS6231 UK, CSA TEW Canada, UL Style 1015, 1028 or 1283 USA

 

These High Quality Solar PV Cables and connectors will ensure minimum loss and maximum lifetime reliability for your Solar Array.

PayPal

Reviews

No customer reviews for the moment.

Write a review

200W MPPT Solar Kit - Victron 20A Controller

200W MPPT Solar Kit - Victron 20A Controller

200W Mono Solar Kit - Complete with Victron Smart Solar 20A MPPT Charge Controller - PV Cables - Charge Cables with Ring Terminals