200W Mono Solar Kit - Complete with Efficient MPPT Charge Controller with USB Charging - PV Cables - Charge Cables with Ring Terminals
1 Item Items
Warning: Last items in stock!
Availability date: 04/30/2016
High Quality 200W Monocrystalline Solar Panel Kit with 'Industry Leading' Quality and Power Output & 5 Year Panel Warranty and now you can charge USB Devices right from the controller.
The panels are multi use, they are small enough to be mobile for caravan or mobile home use or can be permanently mounted on a garage roof or other suitable surface.
One of these 200W Solar Kits can be used to charge up a 12V or 24V Battery Bank and USB Devices through the included Super Efficient Tracer MPPT 20A Charge Controller and PV Cables.
We have designed this kit to be easy to setup and install with the highest quality components.
Please Note: Custom Cable Lengths for Charging & PV Available Upon Request.
2 x 100W Monocrystalline TUV Certified Solar Panel
Industry Leading Warranty - Quality Warranty 5 Years, 92% Power Output @ 12 Years, 85% Power Output @ 25 Years.
Frame - Anodized Aluminium Alloy
Front Glass - 3.2mm,High Transmission, Low Iron,Tempered Glass
Cell Type - Monocrystalline 125x125mm (5 inch)
Junction Box - IP65 Rated
Output Cable - TUV 1x4.0mm2/UL12AWG,Length: 90cm
Dimensions - 945x670x30mm
Weight - 7kg
Reverse Current Protection - Blocking Diodes x 2
Maximum Power - 100W
Optimum Power Voltage (Vmp) - 17.8
Optimum Operating Current (Imp) - 5.62
Open Circuit Voltage (Voc) - 22.30
Short Circuit Current (Isc) - 6.07
Cell Efficiency (%) - 18.43%
Temperature & Coefficients:
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 1000V(IEC) DC
Maximum Rated Current Series: 10A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operating Cell Temperature (NOCT): 47+/-2°C
20A Triron 2210N MPPT Solar Charge Controller
Charge Controller Features:
The EPEVER Triron series adopts a common Negative design and an advanced MPPT control algorithm. These controllers can track the Maximum Power Point point fast and accurately in any situation which will improve energy efficiency and obtain the maximum solar energy from your array. Fully Automatic operation with electronic protection, detection of Day and night.
Advanced MPPT technology
High tracking efficiency no less than 99.5%
Peak conversion efficiency of 98%
Ultra-fast tracking speed
Accurately recognizing and tracking of multiple power point
Multi-function LCD displays system information intuitively
User programmable for battery types, load control etc.
3-Stage charge with PWM output
Common Negative grounding design
RS485 port with industrial standard MODBUS open architecture
Fully programmable function via PC software or remote meter
PV reverse polarity protection
PV short circuit protection
PV over current alarm protection
Battery overcharge protection
Battery over discharge protection
Battery reverse polarity protection
Load short circuit protection
Load overload protection
Nominal System Voltage: 12-24V
Rated Charge Current: 20A
Rated Discharge Current: 20A
Battery Input Range 9~34V
Max PV Voltage 100V - 92V @ 25C
Max PV Input 260W
Boost,Equalize and Float charging.
Automatic 12/24 Volt detection
Integrated temperature compensation
Large terminals for ease of installation
Gel, Sealed or Flooded Battery Types
Fully electronically protected
Power Consumption <20mA
2 x 5M 4mm TUV Rated PV Cable Incl. MC4 Connectors (One of each)
2 X 5M Solar PV Cables come pre-crimped with One Male and One Female Connector, these cables are perfect for connecting from a Solar Panel to a charge controller or inverter where only one set of MC4 Connectors is required. If you require both ends of the cable crimped please see our other items.
PV Cable Features:
Charge Cable Features:
These Solar Charge controllers are an ideal way to get your Solar System charging your battery bank in a controlled manner thus protecting and extending your battery life.
No customer reviews for the moment.