Hybrid Wind & 100W Solar Charging Kit - Rutland 504
5 Item Items
Warning: Last items in stock!
High Quality Hybrid Solar & Wind Turbine Kit - 100W Monocrystalline Solar Panel Kit with 'Industry Leading' Quality and Power Output & 5 Year Build Warranty + Rutland 504 Wind Charger.
This Kit is multi use, they are especially suited to caravan, mobile home or marine use.
The Panel can be permanentely mounted with the supplied ABS Corner Mounts and the Turbine mounted with the supplied 1M stainless steel pole.
One of these Hybrid Solar & Wind Kits can be used to charge up a 12V Battery through the included Charge Controller, OceanFlex Marine grade cable and accessories..
We have designed this kit to be easy to setup and install with the highest quality components.
Please Note: Custom Cable Lengths Available Upon Request.
100W Monocrystalline TUV Certified Solar Panel
Industry Leading Warranty - Quality Warranty 5 Years, 90% Power Output @ 10 Years, 80% Power Output @ 25 Years.
Frame - Anodized Aluminium Alloy
Front Glass - 3.2mm,High Transmission, Low Iron,Tempered Glass
Cell Type - Monocrystalline 125x125mm (5 inch)
Junction Box - IP65 Rated
Output Cable - TUV 1x4.0mm2/UL12AWG,Length: 90cm
Dimensions - 945x670x30mm
Weight - 7kg
Reverse Current Protection - Blocking Diodes x 2
Maximum Power - 100W
Optimum Power Voltage (Vmp) - 17.8
Optimum Operating Current (Imp) - 5.62
Open Circuit Voltage (Voc) - 22.30
Short Circuit Current (Isc) - 6.07
Cell Efficiency (%) - 18.43%
Temperature & Coefficients:
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 1000V(IEC) DC
Maximum Rated Current Series: 10A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operating Cell Temperature (NOCT): 47+/-2°CC
Rutland 504 12V Wind Charger
The Rutland 504 is a super compact turbine that is great for using wind power for trickle charging. You can be sure that when you arrive on board your batteries will be well charged up and ready for your appliances. Rutland 504 Windcharger model is designed for use on board sailing yachts and temporary motor caravan applications.
At less than 5kg the Rutland 504 model proves very convenient for storage and handling. It can be quickly mounted on a 4-6m tower at temporary locations or a fixing that attaches to the vehicle can be raised on site to get up and running.
Aerodynamically styled to maintain good wind flow and stability.
Low wind speed start up maximises power generation in low winds.
High grade construction materials for durability, U.V. stability and weather resistance.
Provides a D.C. power supply to charge 12 V battery banks where low power is needed for domestic devices as well as navigation equipment etc.
Typical battery sizes from 60 – 150Ah.
Cut in Windspeed 3 m/s
Output Voltages Available (Nominal) 12V
Power / Current Ratings:
5m/s 10knots 3W(0.2A)
11m/s 21knots 29W(2.1A)
15m/s 29knots 48W(3.4A)
Packed Weight & Dimensions 6 Kg 550x550x260mm
Generator Type Low friction 3 phase, brushless
Yaw Rotation Slipring for 360° free rotation. Low brush wear.
Governing Devices None
Turbine Diameter 510 mm
Turning Radius 304 mm
Net Weight 3.5 kg
HRSi Hybrid Charge Controller 12V
Charge Controller Features:
The HRSi conveniently brings together a Rutland Windcharger voltage regulator
with an input for up to 160Watts of photovoltaic panels in a single easy to install device. Multi-stage charge control delivers appropriate charge levels required to ensure your batteries get the maximum power they are able to retain and remain float charged.
These Hybrid Charge controllers are an ideal way to get your Solar & Wind Hybrid System charging your battery bank in a controlled manner thus protecting and extending your battery life.
10M OceanFlex 2.5mm 29A Marine Grade Tinned Copper Wire
Oceanflex thin wall tinned electrical cable, with 2.5mm² cross section in accordance with ISO 6722-1:2011 (Class B). This cable features a twin core copper conductor manufactured to BS EN 60228:2005 which is tinned and then insulated in a hard grade PVC insulation. Tinned copper offers excellent corrosion resistance to make this cable particularly suitable in marine environments, while the PVC outer sheath offers good protection against abrasion and cuts, as well as resistance to petrol, diesel, lubricating oils and diluted acids.
Installation Accessories - Mounts - Dual Entry Cable Gland - 1M Steel Pole - Connector Block - Inline Fuse - Blocking Diode - Waterproof Inline Fuse & Holder - Battery Terminals.
Corner Mount Features:
Cable Gland Features:
Two Entry Points: 6mm-12mm, Two Core Solar Cables 3mm to 6.5mm can be used if required.
These High Quality Solar PV Cables and connectors will ensure minimum loss and maximum lifetime reliability for your Solar Array.
1M Steel Mounting Pole Features:
Polished Marine Grade Stainless Steel 1000mm with predrilled holes for mounting the Rutland 504 Wind Charger.
Electrical Accessories Features:
1 x 4Way 15A Connector Block
1 x 15A Schottky Blocking Diode for Solar Panel
1 x 40A Inline Waterproof Fuseholder with 15A Fuse
Battery Terminal Features:
No customer reviews for the moment.